JOE JUST GOT A PROMOTION.
The J.O.E.® PRO occupies a rather underserved segment of the market: an extremely affordable rifle that packs in features typically reserved only for top-tier options. A true giant slayer, the J.O.E.® PRO punches well above its weight with an ambidextrous bolt catch and release, chrome-lined barrel, and premium furniture. Good luck finding another option that offers this much at this price point.
UPPER RECEIVER
The beating heart of your rifle is the upper receiver. For detailed info on our M4P receiver, click here.
the lead is slung through our own 16” chrome-lined, “JOECOM” profile barrel. Like previous models, this barrel is turned from quality 4150CMV blanks per MIL-B-11995-E. Compared to a standard “Government” profile, there is more material added behind the gas block journal to improve rigidity, heat dispersion, and balance. The chrome-lining drastically improves barrel life by adding a harder protective layer over the base steel. Not only is the chrome-lining harder, but it is also more resistant to erosion on account of heat both acutely in longer strings of fire and gradually over time.
With consideration of the needs of the modern shooter, the 0.076” gas port is also much more appropriate for mixed usage with a suppressor than the more common 0.080-0.082” size found on many market offerings. While it seems like a minute change, this more conservative gas port significantly reduces issues arising from the increased back pressure incurred by using a suppressor like hastened component wear and the dreaded double-feed. As with previous models, the low-profile gas block is timed to the barrel with two dimples drilled into the barrel and secured by cross-drilling and pinning the assembly together with a high-strength taper pin. Capping off the barrel assembly is your choice of muzzle device: either a tried-and-true A2 flash hider or your selected suppressor host.
The PRO model still comes with our proven J.O.E.® Bolt Carrier Group (BCG). It features the same quality materials and components as our M4P™ BCG but features the MIL-STD Manganese Phosphate exterior coating and Hard-Chrome lining in the bolt run and gas key bore. It still starts with a full-mass, heat-treated 8620 carrier with a MIL-spec 4130 gas key that is sealed with high-temp gasket compound and secured in place with staked Grade-8 OCKS fasteners from Michiguns. The bolt head is machined from time-honored, MIL-spec Carpenter No. 158 alloy, precision ground, and High-Pressure Tested (HP) and Magnetic Particle Inspected (MP). Each bolt head is also individually marked with a unique QC number that ties it to the barrel with which it is paired. The cold-drawn, 4130 extractor is shot-peened for durability and comes standard with a Sprinco® XP-5 5-coil spring. Likewise, the S7 tool steel ejector is driven by a Sprinco® enhanced ejector spring. These springs are cryogenically relieved and Moly-coated for a stupendously long service life of 25,000 rounds or more. In other words, this set of springs will outlast any of the other wear components within the assembly. Lastly, the firing pin is machined from 8740 alloy, shot-peened for durability, and chrome-plated for corrosion resistance.
Rounding out the upper receiver is a modular, free-floating ASAL rail with a continuous 1913 Picatinny top rail and 5 full-length sections of M-LOK® rail for all your attachment needs. The taper interface of these rails does an excellent job at keeping everything locked up and in-line for reliable zero retention with back-up iron sights and laser aiming devices.
LOWER RECEIVER
The bottom half of the assembly is built on our new Gen 3 GLC™ lower receiver. In most regards, it is a high-quality forged MIL-spec receiver with the notable exception of a modern ambidextrous bolt catch and release mechanism. On the outside is a GI-style 90-degree ambidextrous selector that delivers smooth, positive engagement and maintains reliable option in the “FIRE” position and predictable safety in the “SAFE” position. The J.O.E.® PRO is configurable by you to have a set of Magpul®, B5 Systems, or BCM® GUNFIGHTER™ furniture out of the box.
On the back end is a Mil-Spec impact extruded 7075-T6 Aluminum 6-position carbine receiver extension with an internal dry film lube applique. The extension is torqued down to TDP-spec 40 lbs-ft and secured in place with a double-staked billet steel QD endplate. Inside the buffer tube is an H1 buffer assembly paired with an extra power Sprinco Red buffer spring. These work in tandem with the mid-length gas system to deliver a smoother recoil impulse and more reliable feeding from the magazine when compared to typical carbine weights, springs, and gas systems.
The whole rifle comes in a Mil-Spec Type III Hard Coat Anodizing in either a traditional flat black or our MDC brown coloration.
WARRANTY
As with all our firearms, every component is inspected and assembled by procedure before the complete firearm is test fired with live ammunition. It is our guarantee that they walk as well as they talk. So, should you encounter any issues arising from component selection or assembly error, we will fix it under the provisions of our FYS Limited Lifetime Guarantee. The upper receiver, barrel, and bolt head are all individually engraved with matching numbers noted on a certificate of authenticity that ships with your rifle for QC during the assembly process and down the line should you need work done on your rifle.
WHAT’S INCLUDED
(1) J.O.E.® PRO Carbine
(1) Cable chamber lock
(1) Chamber flag
Model as shown $1,608 MSRP: J.O.E.® PRO ($1,299), 14.5" P/W Barrel (+$60), SureFire® SF3P 3-Prong Flash Hider (+$169), Ambidextrous Magazine Release (+$30) Type III Hard Coat Anodized, MDC Coloration
REGULATION DISCLAIMER:
Federal regulation stipulates that you must be 18 years of age to purchase a long gun. Check your local jurisdiction for any additional regulations or limitations.
